Rexon RHP-530 Transceiver without VOR
We have been informed by Rexon that they are unable to get a crucial component for the production of their handheld radios.
They are presently testing an alternative, and if this proves to be successful and they decide to incorporate it into the radios, the soonest the supply chain will be restored is in the last quarter of this year. If however their tests are unsuccessful, delays are foreseen to be stretched into 2022.
We are awaiting further information from Rexon in Taiwan.
Description
FEATURES:
- VOR navigation with CDI760 COM channels and 200 NAV channels
- 10 weather channels
- 100 memory channels
- 121.5MHz emergency frequency recall
- Semi-duplex operation
- Scanning of COM and NAV bands
- Dual watch function
- One touch selection of active and standby frequency
- Side tone function
- LCD back light
- Optional Bluetooth
- Optional VOR
Specifications:
| General | |
| D.C. Supply Voltage | 7.5V |
| Frequecy range | TX 118.000MHz~136.975MHz(143.975 optional) |
| RX 108.000MHz~136.975MHz | |
| Wheather channels: FM | |
| 161.650~163.275MHz(USA Only) | |
| Type of Emission | 6K00A3E(AM), 16K0G3E(FM) |
| Channel Spacing | 25KHz + 8.33KHz |
| Temperature range | O.P. -22℃～＋55℃ |
| Frequency Stability | +/-2.0ppm |
| Relative Humidity | 70%~90% |
| Battery Life(With BP-17L) | Without power save≧ 8hr |
| With 1/2 duty cycle ≧ 16hr | |
| With 1/3 duty cycle ≧ 18hr | |
| Power Off Current Drain | ≤ 75uA |
| External microphone impedance | 150 Ohm |
| Speaker impedance | 4 Ohm |
| Antenna impedance | 50 Ohm |
| Dimensions | 60.5*140*44.5mm |
| Weight | 0.38Kg |
| Shock Resistance | Meet MIL STD 810 C/D/E/F |
| Moisture & Dust Resistance | According to IEC529 & IP54 |
| Transmitter | |
| RF Output Power | 1.5W(CW), 5.0W(PEP) Typical |
| Adjacent Channel Power | ≤ 60dB |
| Current Drain | ≤ 950mA |
| Modulation Type | Low level Modulation |
| Modulation Limiting | 70~100% |
| Conducted Spurious Emission | <1GHz ≤ -46dBm, >1GHz≤ -40dBm |
| Audio Harmonic Distortion | ≤ 10%(@85%+/-3dB Modulation) |
| Hum and Noise | ≧40dB @30% Modulation |
| Receiver | |
| Configuration | Double Conversion Super heterodyne |
| 1st IF(46MHz), 2nd IF(455KHz) | |
| Sensitivity | AM ≤ [email protected] S/N 1KHz |
| ≤ [email protected] Sinadwith CCITT | |
| FM ≤ 0.5uV(@12dB SINAD) | |
| Squelch Sensitivity | AM ≤ 0.25uV |
| FM ≤ 0.3uV | |
| Adjacent Channel Rejection | ≧60dB |
| Intermodulation Response rejection | ≧64dB |
| Blocking | ≧70dB |
| Spurious Emission | ≤ -57dBm from 9KHz to 1GHz |
| ≤ -47dBm from 1GHz to 4GHz | |
| Spurious Response Rejection | ≧ 70dB |
| Audio Distortion | ≤ 5% |
| Standby Current Drain | 65mA(without power save) |
| 35mA(with 1/2 Duty Cycle) | |
| 20mA(with 1/3 Duty Cycle) | |
| Audio Output Power | ≧ [email protected]% Distortion |
In the Box:
1 X RHP-530 Radio
1 X belt clip
1 X antenna
1 X battery pack
1 X charger
1 X headset adaptor
1 X user manual
Additional information
| Weight | 0.84 lbs |
|---|
1 review for Rexon RHP-530 Transceiver without VOR